Angle encoders, rotary encoders
Rotary encoders
- Hollow shaft encoder
- Shaft encoders
- Rotary encoders without integral bearing
- Rotary encoders with integral bearing
Rotary encoders with through-hole
Rotary encoders with through-hole have built-in stator (flexible) coupling, so the graduated disk of the encoder is connected directly to the shaft to be measured.
Within this construction absolut and inkremental (TTL and sinus) rotary encoders exist.
The main series:
- ECN 1023, 1013, 425, 413, 125, 113, 436S
- EQN 1035, 1025, 437, 425, 437F
- ERN 1020, 1070, 1030, 1080, 420, 460, 430, 480, 120, 130, 180
Rotary encoders with axis
Rotary encoders with axis have built-in stator (flexible) coupling, so the graduated disk of the encoder is connected directly to the shaft to be measured.
Within this construction absolut and inkremental (TTL and sinus) rotary encoders exist.
The main series
- ROC 1023, 1013, 424S, 425S, 425, 413
- RIC 418
- ROQ 1023, 1025, 437, 425, 430, 437F, 436S, 425
- RIC 418
- ROD 1020, 1070, 1030, 1080, 426, 466, 436, 486, 430, 420, 480
Rotary encoders without integral bearing can be applied without stator (flexible) coupling.
Within this construction absolut and inkremental rotary encoders exist.
The main series:
- ECI 1118, 1135, 1130, 1319, 1331, 119
- EBI 135
- ERO 1420, 1470, 1480
Rotary encoders which don’t need stator coupling, and have axis or through-hole.
Within this construction absolut and inkremental rotary encoders exist.
The main series:
- ECN 1123, 1113, 1325, 1313, 425, 413
- EQN 1135, 1125, 1337, 425
- ERN 1023, 1123, 1321, 1326, 421, 1381, 1387, 487
Angle encoders
- Angle encoders with integral bearing, for separate shaft coupling
- Angle encoders with integral bearing and through-hole
- Angle encoders without integral bearing
These angle encoders have built-in stator (flexible) coupling, so system accuracy consists of the deviation caused by the shaft connection.
The main series:
- ERP 880, 4080, 8080
- ERO 6080, 6070, 6180
- ERA 4280C, 480C, 4880C, 4282C
- RCN 2000 , 500, 8000 család
- ECN 200
- RON 200, 700, 800, 900 család
These angle encoders have to have separate coupling. The shaft couplings accept axial tolerances of ± 1 mm.
The main series:
- ROD 200,700, 800 family
Angle encoders without integral bearing work on a magnetic principle. Reading head is located out of the graduated disk
The main series:
- ERA 7480C , 8480C
- ERM 2280, 220, 280, 2485, 2984